Connect your phone system (easybell)

How to connect your easybell cloud phone system to Univents: enable the AMI interface at easybell, whitelist the IP address, enter the credentials in Univents and assign extensions to team members. Included from the Growth plan.

With the easybell integration Univents knows who is calling. For an incoming call a call card appears with the matching customer, their open quotes, the next and the last event and the latest call note. From any contact you call with one click, and every call ends up in the call log on the contact. Calls are not recorded — Univents only stores who spoke with whom and when, plus your note.

Requirements

  • The phone system is included from the Growth plan at no extra cost. On smaller plans the page Integrations → Telephony → easybell shows a note about the plan you need.
  • Your business uses the easybell cloud phone system Classic or Pro. Other phone systems, or easybell lines without a cloud phone system, cannot be connected.
  • To connect, you need the right to change workspace settings as owner or admin.

Step 1: Enable the interface at easybell

  1. Sign in to the easybell customer portal.
  2. Open Cloud PBX → Advanced settings → Integration (in older views the section is called Connectivity).
  3. Enable the AMI interface.
  4. In the IP whitelist enter the address 77.42.82.185. This is the fixed address of Univents through which the connection runs. The same address is shown in Univents on the easybell page, with a button to copy it.
  5. Click Save. easybell then shows you the user name and the password for the interface — you need them in the next step.

If your phones no longer register after saving, or calling from Univents does not work, also add your office’s public IP address to the same whitelist. easybell requires this when phones and Univents are not on the same network.

Step 2: Connect in Univents

  1. In Univents open Integrations, category Telephony, and click easybell phone system.
  2. Enter the AMI user name and the AMI password from easybell.
  3. Click Connect.

The status tells you where things stand: Connected since … means everything is running. If easybell rejects the user name or password, check the credentials in the customer portal. If it says the IP address has not been whitelisted yet, the entry from step 1 is missing or has not been saved yet. With Test connection you query the status again. After saving, Univents never shows the password again — to change it, enter it anew.

Step 3: Assign extensions

After connecting, click Read extensions. Univents fetches all phones and extensions from your system.

  • For each extension choose the person under Team member who should see the call card when this extension rings.
  • For each person set Dials from here on exactly one device. Univents dials from this phone when the person clicks Call in Univents.

Only people with the right View inquiries see a call card. If an assigned person lacks it, the page points this out.

Day to day: taking and making calls

  • Incoming call: The card appears for everyone whose extension rings. If Univents does not know the number, you create a contact or an inquiry right there. If the recognized contact is wrong, choose Assign to another contact.
  • Note: During or after the call, record what it was about under Note. The note then appears in the call log.
  • Calling: Click Call on the contact. Your own phone rings first; as soon as you pick up, the number is dialed. If your desk phone should pick up by itself, switch on auto answer (on some devices intercom) on the device. Special-rate numbers and destinations outside Germany, Austria and Switzerland cannot be dialed from Univents.
  • Call log: In the contact you find all calls with this contact in the Calls tab, including missed ones.

The AI assistant also knows about calls: for example, it shows you today’s missed calls or assigns a call to a contact.

Good to know

  • Employee data: The call log shows who spoke with whom and when. If your business has a works council, discuss the introduction with them beforehand.
  • In case of a disruption: If the connection to the phone system is interrupted, you keep phoning as usual — but no call cards appear during that time, and the calls are missing from the call log. If the disruption lasts longer than 15 minutes, owners and admins receive a notification.

Disconnect

Under Integrations → Telephony → easybell click Disconnect. After that, calls are no longer recognized; the existing call log is kept. If you want to end the integration completely, also disable the AMI interface in the easybell customer portal.

If your trial ends or you switch to a plan below Growth, Univents no longer recognizes or stores new calls; the existing call log is kept.

Univents newsletter

Three topics, pick any. Roughly once a month, no more.

Topics