Set up a time clock terminal: use a tablet as a time clock
After this article you can connect a tablet on site as a time clock, give your team clock IDs and PINs, and disconnect or unlock a lost or locked terminal.
A tablet in the kitchen, the storeroom or at the entrance becomes a time clock: everyone clocks in, out and on break there with their clock ID and a PIN. Nobody signs in on the tablet, and it only shows who is clocking right now and that person’s shifts for today.
The time clock terminal is available from the Growth plan, like the break rules.
Connect a terminal
- Open Settings → Working time. You’ll find the Time clock terminals card there.
- Click Add terminal, enter a name (e.g. “Kitchen”) and pick a location if needed.
- Click Create code. You’ll see a 10-character pairing code. It works once and for 10 minutes.
- On the tablet, open univents.app/stempeluhr in the browser and enter the code.
The tablet stays connected after that. Tip: with “Add to Home Screen” the time clock runs full screen.
You need the “Edit staff” permission to connect a terminal.
Give out clock IDs and PINs
Each person needs a clock ID and a PIN:
- Enter the clock ID in the staff record: Staff → person → Time tracking → Account → Edit. It is unique within your business.
- Set the PIN (4 to 6 digits) right below with Set PIN. Simple sequences like 1234 or 1111 are not allowed.
- Staff can also set their own PIN in the staff portal under Time, as soon as a terminal is connected and they have a clock ID.
The PIN is only stored encrypted. Nobody can look it up, not even managers.
How your team clocks
- Type the clock ID, then Next.
- Type the PIN, then Sign in.
- Name, status and today’s shifts appear. Depending on the status you get Clock in (to a shift or without a shift), Start break, End break or Clock out.
- After 5 seconds or with Done the terminal returns to the keypad.
The time always comes from the server, never from the tablet. If the clock ID or PIN is wrong, the terminal always shows the same message.
Breaks: clocked breaks are added up when clocking out. If the total is below your break rule, the break is raised to the rule. By law, breaks shorter than 15 minutes don’t count as rest breaks; the terminal points this out.
Without internet clocking isn’t possible. The terminal then shows “No connection”; the time is added later in the staff portal.
Clocked times show up as usual under Staff → Time approvals, with the note “clocked at terminal Kitchen”.
Locking and unlocking
- Wrong PIN: after 5 wrong attempts the person is locked for 15 minutes. In the staff record you can release them right away with Unlock.
- Many failed attempts on the device: after more than 10 wrong sign-ins in 10 minutes the terminal pauses for 10 minutes. After more than 30 in one day it stays locked until you click Unlock under Settings → Working time → Time clock terminals. Everyone with the “Edit staff” permission gets a notice in the bell.
Disconnect a terminal
If a tablet is lost or no longer needed, click Disconnect next to it. This takes effect immediately: the tablet can no longer clock and shows the code entry again. To reconnect it you need a new code.